Information about the (extended) Advanced Programmable Interrupt Controller. More...

Enumerations
enum	Device { TIMER = 0 , KEYBOARD = 1 , COM1 = 4 , COM2 = 3 , COM3 = 4 , COM4 = 3 , FLOPPY = 6 , LPT1 = 7 , REALTIMECLOCK = 8 , PS2MOUSE = 12 , IDE1 = 14 , IDE2 = 15 }
	Historic order of interrupt lines (PIC) More...

Functions
bool	init ()
	Executes system detection. More...

uint8_t	getIOAPICSlot (APIC::Device device)
	Returns the pin number the `device` is connected to.

uintptr_t	getIOAPICAddress ()
	Queries the I/O-APIC address determined during system boot. More...

uint8_t	getIOAPICID ()
	Queries of ID of the I/O-APIC determined during system boot. More...

uint8_t	getLogicalAPICID (uint8_t core)
	Returns the logical ID of the Local APIC passed for core. More...

uint8_t	getLAPICID (uint8_t core)
	Get the Local APIC ID of a CPU. More...

Variables
const uint8_t	INVALID_ID = 0xff
	Invalid APIC ID. More...

Detailed Description

Information about the (extended) Advanced Programmable Interrupt Controller.

Enumeration Type Documentation

◆ Device

enum APIC::Device

Historic order of interrupt lines (PIC)

Enumerator
TIMER	Programmable Interrupt Timer (PIT)
KEYBOARD	Keyboard.
COM1	First serial interface.
COM2	Second serial interface.
COM3	Third serial interface (shared with COM1)
COM4	Forth serial interface (shared with COM2)
FLOPPY	Floppy device.
LPT1	Printer.
REALTIMECLOCK	Real time clock.
PS2MOUSE	Mouse.
IDE1	First hard disk.
IDE2	Second hard disk.

Function Documentation

◆ getIOAPICAddress()

uintptr_t APIC::getIOAPICAddress ( )

Queries the I/O-APIC address determined during system boot.

Returns: Base address of the (first & only supported) I/O APIC

◆ getIOAPICID()

uint8_t APIC::getIOAPICID ( )

Queries of ID of the I/O-APIC determined during system boot.

Returns: Identification of the (first & only supported) I/O APIC

◆ getLAPICID()

uint8_t APIC::getLAPICID ( uint8_t core )

Get the Local APIC ID of a CPU.

Parameters

core	Query CPU core number

Returns: LAPIC ID of CPU or INVALID_ID if invalid CPU ID

◆ getLogicalAPICID()

uint8_t APIC::getLogicalAPICID ( uint8_t core )

Returns the logical ID of the Local APIC passed for core.

The LAPIC's logical ID is set (by StuBS) during boot such that exactly one bit is set per CPU core. For core 0, bit 0 is set in its ID, while core 1 has bit 1 set, etc.

Parameters

core	The queried CPU core

◆ init()

bool APIC::init ( )

Executes system detection.

Searches and evaluates the APIC entries in the ACPI table. This function recognizes a possibly existing multicore system. After successful detection, the number of available CPUs (which is equal to the number of local APICs) ) can be queried using the method Core::count().

Note: Called by kernel_init() on BSP

Returns: true if detection of the APIC entries was successful

Variable Documentation

◆ INVALID_ID

const uint8_t APIC::INVALID_ID = 0xff

Invalid APIC ID.

The highest address is reserved according to xAPIC specification

Enumerations

Functions

Variables